Product Details:
|
Type: | Francis Turbine | Structure: | Horizontal/Vertical Shaft |
---|---|---|---|
Application: | Grid-tie Power System, Hydropower Station | Water Head: | 30-300 Meter |
Capacity: | 0.1-20MW | Efficiency: | 85%-96% |
Runner Material: | Casting Stainless Steel 0Cr13Ni4Mo (ASTM CA6NM) | Spiral Case: | Welded Carbon Steel (Q345B, ASTM Gr.B, S335J0) |
Guide Vanes: | Stainless Steel 0Cr13Ni4Mo (ASTM CA6NM) | ||
Highlight: | 30m Francis Hydro Turbine,300m Francis Hydro Turbine,20MW Francis Hydro Turbine |
Horizontal / Vertical Shaft Francis Turbine Runner for Francis Turbine Capacity 0.1MW - 20MW
Descrition:
The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations.
lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc. Hydoru manufacture Francis runner have a good efficiency and cavitation performance.
Main Structure of Francis Hydro Turbine
This hydraulic turbine type is Horizontal shaft Francis. A inlet valve is equipped in front of the spiral casing of the turbine. When viewed at the turbine from the generator end, the rotating direction of the hydraulic turbine is clockwise .The turbine is horizontal shaft and metallic spiral casing and the stainless steel runner. This unit has two bearings, assembled on the generator seat. The principal parts of the structure of turbine as follows:
1)Spiral case
2) Distributor
3) Rotating parts
4)Inlet tube
5) Draft tube
6) Layout for water,instruments and pipe-line
Water flows through penstock of the power station, Butterfly valve, expansion pipe, inlet tube, spiral case and wicket gates into the runner, and then it drives the runner to revolve and convert hydraulic energy into mechanical energy and drives the rotor of generator revolution by the force of the main shaft of turbine, thus converting the mechanical energy into electric energy.
Applications:
Francis turbines are the most common water turbine in use today.
They operate in a water head range of 10 to 300 meters and are primarily used for electrical power production. The power output generally ranges from 0.1MW to 750MW.
Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small francis turbine always arranged with horizontal shaft, but it is not absolute.
Specifications:
Type |
Horizontal/vertical Francis turbine |
Water head |
10m -- 300m. |
Installation capacity |
0.1MW -- 20MW |
Runner material |
Stainless steel (0Cr13Ni4Mo) |
Generator type |
synchronous generator |
Auxiliary Equipment |
Governor, Inlet Valve, unit side panel, excitation system |
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
Francis turbine spiral case assembly
Contact Person: Mr. Tu mingqi
Tel: +86 13003602610
Fax: +86-571-85194290