|Horizontal Shaft Kaplan Hydro Turbine
micro hydro turbines,
low head water turbine
100KW - 10MW Horizontal Kaplan Turbine / S Type Turbine with Adjustable Blades Runner
S type turbine is suitable for heads from 2m to 20m and large discharge hydropower station.
S-type tubular turbine is Available in versions of Horizontal Kaplan turbine, also called horizontal Kaplan water turbine,S-type Semi-Kaplan and S-type Propeller.
lt's feature is that the water flow is axial throughout the passage from the inlet to the outlet, so that the passage is a straight conduit essentially.The turbine shaft passes out of the tube at the point where the tube changes direction, installation is ether with the transfer belt or directly connected to the generator. This modern hydro turbine is characterized by high efficiency in a broad band of flow rates.
S-type turbine is also consist of fixed runner blades(s type propeller turbine) and adjustable runner blades( s type kaplan turbine).
S-type horizontal Kaplan with better machine efficiency is achieved by relative motion of vanes and blades, which is called the double regulation Horizontal Kaplan or horizontal full Kaplan. In the double Kaplan regulation version of the turbine, runner and guide wheel regulation the range of flow rate regulation extends from 20% to 100% of the rated discharge rate,This turbine is therefore suitable for certain run-of-river generating stations where the river flow varies considerably. Installation is almost exclusively with a direct connection to the generator.
S-type propeller turbine is just what its name implies. The basic propeller turbine consists of a propeller, similar to a ship's propeller, fitted inside a continuation of the penstock tube. This kind of propeller turbine is known as a fixed blade axial flow turbine because the pitch angle of the rotor blades cannot be changed. The part-flow efficiency of fixed-blade propeller turbines tends to be very poor.
1. Water head: 2m - 20m
2. Capacity: 0.1MW -- 2MW
3. Frequency: 50hz / 60hz
4. Generator Output Voltage: 0.4KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the S type turbine, you should have some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
S type turbine with fixed blades/ movable blades
2m -- 20m.
100KW -- 2000KW
Runner blades material
Stainless steel (0Cr13Ni4Mo)
Governor, Inlet Valve, unit side panel, excitation system
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
Contact Person: Mr. Tu mingqi
Tel: +86 13003602610