hydro generator turbine online manufacture

100KW - 10MW Low Water Head S Type Tubular Hydro Turbine with Adjustable Blades Runner S type turbine is suitable for heads from 2m to 20m and large discharge hydropower station. Describe: S-type tubular ... Read More

AC Three Phase Synchronous Hydroelectric Generator Excitation System With Francis Turbine Applications: 1. Output capacity: 0.1MW -- 20MW 2. Frequency: 50hz / 60hz 3. Output voltage: 400V, 3.3KV, 6.3KV, 10.5KV ... Read More

AC three phase synchronous hydroelectric generator with Hydro Turbine For hydropower Project Applications: 1. Output capacity: 0.1MW -- 20MW 2. Frequency: 50hz or 60hz 3. Output Type: 0.4KV, 3.3KV, 6.3KV, 10... Read More

Impulse Water Turbine Turgo Hydro Turbine 100KW - 1000KW With Stainless Steel Runner Basic Parameter: turbine type: Horizontal Turgo with one nozzle Runner Diameter: 50cm Runner material : Stainless steel ... Read More

Low Water Head 2m to 20m S Type Tubular Turbine With Generator , Speed Governor S type turbine is suitable for water heads from 2m to 20m and large discharge hydropower station. S-type tubular turbine is ... Read More

Low Head Water Kaplan Hydro Turbine 200 KW With Adjustable Blades Descrition: The kaplan turbine with vertical shaft arrangement , with three types as open flume, pressure flume, and seal off (concrete spiral ... Read More

500 KW Francis Hydro Turbine , Medium Head For Hydropower Stations Descrition: Normally, we adopt the horizontal Francis with capacity below 5MW, runner diameter below 90cm. And the vertical Francis with ... Read More

Horizontal / Vertical Shaft Francis Turbine Runner for Francis Turbine Capacity 0.1MW - 20MW Descrition: The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to ... Read More

Horizontal Francis Water Turbine Runner with Water Head From 10m - 300m Specifications: Type Horizontal/vertical Francis turbine Water head 10m -- 300m. Installation capacity From 0.1MW to 20MW Runner material ... Read More

Horizontal / Vertical Shaft Francis Turbine Runner for Francis Turbine Capacity 0.1MW - 20MW Descrition: The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to ... Read More