|Turgo Water Turbine
|Stainless Steel 0Cr13Ni4Mo Equal To CA6NM)
turgo water turbine,
residential water turbine,
turgo hydro turbine with one nozzle
Impulse Water Turbine Turgo Hydro Turbine 100KW - 1000KW With Stainless Steel Runner
turbine type: Horizontal Turgo with one nozzle
The turgo turbine is a kind of impulse turbine and suited for heads from 50m-250m, between Francis turbine and Pelton Turbine.
The feature is an angle of 22.5° is formed between the center line of the nozzle jet and the rotational plane of the runner. The water from the penstock is transformed into a high speed jet through the nozzle. The water is directed obliquely to one side of the runner and discharges at the other. The dynamic force of water flow makes the runner rotate rapidly.
It consists main turbine runner, nozzle assembly, conduit part, deflector control and hydraulic etc.
Turbine runner is the principle part of the turbine. runner made of casting stainless steel. It has influence over the characteristic of the turbine. The runner consists of vanes, the hub and the outer ring of runner. The shape of vane is three dimension camber. The outer ring applies to strengthen the runner and to reduce the loss of wind.
The plane key set up between the runner and the main shaft in order to transfer running torque. The elastic coupling is fitted on the end of main shaft. The end of main shaft and the hole of coupling are fitting and transfered the running torque by plane key.
Turgo turbine is characterized not only by high specific speed , high flow and even efficiency curve, but also by simple construction, easy erection test and adjustment , reliable operation, simple maintenance and low cost.
Turgo Turbine Applications:
1. Water head: 50m -- 250m
2. Capacity: 100KW -- 2000KW
3. Runner diameter: below1.5m.
4. Frequency: 50hz / 60hz
5. Generator Output voltage: 0.4KV, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interested in the Turgo turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
Water head range for Turgo Turbine selection.
Horizontal Turgo turbine with one /two nozzles
From 50m -- 250m.
From 100KW -- 2000KW
Stainless steel (0Cr13Ni4Mo)
Governor, Inlet Valve, unit side panel, excitation system
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
Contact Person: Mr. Tu mingqi
Tel: +86 13003602610